LOA 60,05 m Beam 11 m Draft 3,8 m Built in year 1977 Class : Phoenix Register of Shipping Flag : Palau Gross Tonnage of 1.070 and Nett Tonnage of 244 Deadweight : 1.500 metric tonnes Ice strength Speed : 5,5 knots Engines : 2 x G.M. (Detroit Diesel) / General Motors-Detroit Allison 8V-71-TI, 612 kw, 2.300 rpm, Propellers 1 Fixed Pitch (Port Side) + 1 Fixed Pitch (Starboard) Auxiliaries Engines : Bowthruster + No Sternthruster (1 Bow Retract. dir. thruster) 1 Deck... read more

'Malago' - Cutter Suction Dredger (s/propelled) - 500mm disch. dia / 18m dredge depth ===== Design: Hydroland Built: 1983, at Hydroland - Nantes, France Class: MCA loadline exemption LOA: 65m/39m, Beam: 9.5m Max draft: 2.8m Principal Dimensions and Characteristics Length Overall: 65m Length: 39 m Beam: 9.5m Propulsion: 2 x HPU 200-300 2214/2215 Engine Hydraulic Engine: Cummins KTA38 Power: total 582kW Hydraulic Pumps: Poclain L6H20 / L4H18 Fuel Capacity: 70,000 ltrs Dredging Dredge Pump: 20” Type S3B Form A4 Amsco Pump Dredge Pump Rate: 2,000-2,... read more

MV ‘Gwendoline’ ex ‘C.R.E.I. I’ Cutter suction dredger - s/propelled - with hopper/bow coupling  Discharge method: pump ashore and rainbow  Built 1978/rebuilt 2017, Cantieri Navali di Boretto, Italy Class: RINA next SS 19/05/2025 Class notation: 100-A-1.1 - Nav inland waterways; Dg   LOA 62.00 x Beam 9.68m x Depth 2.80m Empty draft: 2.50m FWD; 1.0m aft Draft fully laden 4.00m FWD; 2.5m aft Hopper capacity: 500m3 Propulsion: 2 x Cummins KTA19M2 - 2 x 580bhp Auxiliary: 1 x Cummins N-855-M(H.E.) 197hp   Fuel capacity: Storage tank 18,... read more

'Brewster' ex 'Petrus Plancius' - Cutter Suction Dredger - dismountable ======= Design: Design: IHC Beaver 1600 C Built: 12/2008, at IHC Beaver Dredgers BV, Mauritius Class: Bureau Veritas - next SS: 21 Oct 2026 Class notation: I+HULL·MACH Dredger-no propulsion coastal area LOA: 35.85m, Beam: 8m, Depth: 2.46m Max draft: 1.55m Main pontoon: 13.00 x 2.95 x 2.46m Side pontoons: 20.00 x 2.44 x 2.44m Dredge depth: 16m (design) Cutter: Type IHC 10-CB-AL-1455-180 / Diameter: 1,455mm / Cutter Power 170kW Auxiliary power (cutter, winches, spuds): Caterpillar 340... read more

Vessel excavator fitted with a Komatsu type 400, showel 1,5 cbm at about 7,5 m outreach. Suction pipe 18 inches and can reach dept of about 18 meter. LOA 74,5 m Beam 9,47 m Draft 2,88 m Built in year 1982 Flag : Denmark Gross Tonnage of 853 and Nett Tonnage of 255 Deadweight : 1.089 metric tonnes Speed : 10 knots Engines : 1 x Deutz / Kloeckner-Humboldt-Deutz - GFR SBA6M528, 441 kw, 683 rpm, Propellers 1 Fixed Pitch (Center) Auxiliaries Engines : Bowthruster + No Sternthruster (1 Bow Thwart. FP thruster 150kw) 2 Decks... read more

We are pleased to present for sale this 99m Trailing Suction Hopper Dredger with 2500m3 hopper. The vessel has a dredging depth of 33 metres, with an 850mm pipe feeding material into the 2500m3 hopper. Discharge is also via pipe, and the vessel is able to self-discharge. Significant crew accommodation and onboard features also mean that the vessel can undertake longer projects and be used for a wide scope of operations. All details presented in good faith but without guarantee. For further details, please get in touch.... read more

This ship is a steel, single deck, double engine, double propeller, double rudder, double trail type, square tail, bulbous bow coastal self-suction dump ship. Three decks are provided on the aft main deck. The ship’s engine room rear wall to the freighter front wall is a double-sided structure. The tank bottom in the ship is a double bottom structure, while the other areas are single bottom and single side structure.... read more

We are pleased to present for sale this versatile 35M backhoe dredge barge with thrusters and onboard power. Currently operating in Australia, this dredge barge is equipped with an excavator that allows a max dredging depth of 17m. Four Thrusters and three spudlegs ensure better positioning and more precise operations. Additionally, the vessel has jack up capabilities. The excavator and thrusters are powered and there is a generator onboard with fuel tanks to run the equipment. Crew welfare also benefits from a welfare room, w/c and sheltered areas for operations that include an... read more

8" Electric Powered Booster Pump with Direct Feed Tank 200 hp electric motor with 15hp service water pump Dredge pump is belt driven Service water with soft start panel Skid mounted Just serviced and ready to go Located in Florida New price: $36,000 USD Reference No. D2110... read more

1143BSB Dredger - Grab Hopper Dredger For Charter - FROM DIRECT OWNERS - ADDITIONAL INFORMATION Only available for charter within UK waters. Last SS 09/2019 Last annual survey 09/2022 Vessel fully rebuilt 2014 Draft (Light) 1.2 m Hopper Capacity 125 m3 Bucket Capacity 1.5 m3 Excavator Hyundai HX300 Is a modern, compact and efficient self-propelled grab hopper dredger. Equipped with a 360 degree azimuth propulsion unit, self-elevating spud legs and a shallow draft, she is highly manoeuvrable vessel able to dredge in more confined hard to reach areas. Operating with a sma... read more

Crane operating: Hydraulic pressure Hoisting speed: 60 m /min (Up and Down) Turning speed: 0.80 RPM Bucket type: Hydraulic pressure / Horizontality Cycle time : 134.6 sec (depth 20m) Operating radius: 20 m Dredging per hour: 530 ?/h Dredging depth: 30 m Bucket capacity: 20 ?(50ton) LOA 60 m Beam 20 m Draft 2 m Built in year 1985... read more

2010 Portable Suction Dredge Price: $147,000 CDN Width: 8’6 Length: 26', Cutter head 18' Draft: 20″ 6″ Suction, 8″ Discharge Both sides can discharge or can be discharged out stern valves on discharge lines Digging depth approx 8′ Articulating cutter head – approx 6′ swing Powered by a 4-53 GM Located in Southern Ontario (Lake Erie area) File Ref D2138... read more

This ship is a self-priming and self-unloading sand ship propelled by a stern model, twin engines, twin propellers, twin rudders, and diesel engines; There are four deckhouses at the rear. The cargo hold area is double bottom and double side, bottom and side are longitudinal frame structure. Behind the first anti-collision bulkhead is a double-bottom single-side transverse frame structure, and the bow and stern tip cabin and engine room are single-bottom single-side transverse skeleton structure, six cargo holds are arranged in the cargo area. This ship is a cargo ship that uses its own belt c... read more

We are pleased to present for sale this 99m Trailing Suction Hopper Dredger with 2500m3 hopper. The vessel has a dredging depth of 33 metres, with an 850mm pipe feeding material into the 2500m3 hopper. Discharge is also via pipe, and the vessel is able to self-discharge. Significant crew accommodation and onboard features also mean that the vessel can undertake longer projects and be used for a wide scope of operations. All details presented in good faith but without guarantee. For further details, please get in touch.... read more

General info Length (m) 33.12 Beam (m) 6.30 Draft max (m) 2.20 Airdraft (m) 5.20 Displacement max. 220.752 Shipyard Niestern Sander BV, Delfzijl Year of constr. 1922 Navigation VHF 2x Sailor RT2048 GPS Furuno Depth sounder Furuno Autopilot Radio Zeeland Sigma 500 Radar Radio Holland TFT radar Rate of turn Radio Zeeland Sigma 500 Rudder indicator Radio Zeeland Sigma 500 Intercom yes Remaining 2x Acer TFT screen for navigation and camera Auxillary Shore current 400 Volt Generatorset 1x Deutz 400 Vol... read more

DO0328 Dredger - Trailing Suction Hopper Dredger For Sale - FROM DIRECT OWNERS - One generator is broken down. Owners have a reconditioned one for replacing it. It needs to go into dry dock. It could sail to dry dock. Certificates are expired 2017-2018, last time it was dry docked. Dredging system is reported to be in good condition. Engines are run often. The sale includes a spare Toyo pump (new has a price of 200.000 Euros) Photos of the equipment working are from 2018. Laid up since then. Capabilities: Chap. G.O.: 23.24 MT Chap. Oil: 2.28 MT Chap. Fresh water: 6.5 MT Contai... read more

Mudcat MC915 Auger Dredge PRICE $132,500 CDN Construction material – Steel •Length : 38’ 11″ •Width : 9′ 0″ •Height : O.A.8’8′ •Weight : 21,000 lbs. & Dry •Draft : 21″ •Floating Clearance : 6’9″ •Fuel Capacity : 360 gallons •Pontoons : Two 36″ x 32″ x 330″ 10 Gauge H.R. Steel with Internal Bulkheads and Stiffeners; formed for rigidity; polyurethane foam filled •Auger: Diameter 13-5/8″ •Pitch : 11″ •Flighting: 3/8″ &bul... read more

LOA 88 m Beam 16 m Draft 3,01 m Built in year 2010 Class : Indian Register of Shipping Flag : India Gross Tonnage of 2.024 and Nett Tonnage of 607 Deadweight : 465 metric tonnes Engines : Unknown Builder Auxiliaries Engines : 2 Wartsila 3.000 kw, Boilers : 3 x Th. Oil Heater 1 Deck... read more

LOA 11,43 m Beam 3,1 m Draft 1,15 m Gross Tonnage of 5 Engines : 1 x, 312 kw... read more